MPI Equipment – Test Bench Units

Our test bench units will detect and locate fatigue cracks or processing defects in ferrous components, using the ‘wet continuous’ method of magnetic particle inspection.

With a wide range of units available, we can help you choose the bench that is best suited to your needs.

The D-2060 with CE is one of our most powerful wet magnetic benches, providing 6,000 amps of 3-phase Full Wave Direct Current and an optional 6,000 amps of Alternating Current. This inspection equipment offers magnetisation to find surface and sub-surface defects with clearer indications while using minimal power.

The two outputs are independently adjustable to set each magnetic field, circular or longitudinal, at distinct levels.

For more information, see the Product Data Sheet.

MAG 40 test bench unit for MPIThe MAG 40 units are medium-duty machines which can inspect components up to 1 metre in length. It is ideal for low-volume testing in machine shops, tool rooms, foundries and similar plants.

  • Thyristor contolled
  • 2,500 Amp output
  • AC and halfwave DC
  • Stainless steel tank
  • Conforms to EN ISO 9934-3: 2002

Part numbers:

  • 007E241 – MAG 40 HD with coil diameter 225mm (transversing)
  • 007E243 – MAG 40 HFD with coil diameter 150mm (clamping)

For more information, see the Product Data Sheet.

MAG 50 test bench unit for MPIThe MAG 50 series of test bench units are heavy-duty machines designed for the inspection of ferrous components. There are numerous options in both ranges and all units come with separate power packs and stainless steel tanks.

For more information, see the Product Data Sheet.

Universal SW test benchOur Universal SW test benches are equipped with two AC circuits, allowing them to detect longitudinal and transversal cracks at the same time. These benches are suitable for testing work pieces with clamping lengths from 1,200mm to 3,200mm, and a maximum weight of 300kg (standard) or 1,000kg (optional).

Each Universal SW test bench is equipped with:

  • pneumatic clamping of the test pieces
  • infinitely variable clamping length adjustment
  • manually moveable magnetisation coil
  • stainless steel test liquid drip tray and tank
  • separate dust-proof switch cabinet with display
  • command box with control keys and emergency-off
  • demagnetisation for both magnetisation circuits

For part numbers and more information, see the Product Data Sheet.

Universal WE test benchOur Universal WE test bench is designed for current flow and yoke magnetisation and, with the right accessories, for magnetic field flux and induction flux method. It is suitable for testing work pieces with a clamping length of max. 600 mm (max. 900 mm with the optional extension kit) and a maximum weight of 100kg.

Each Universal WE bench is equipped with:

  • current flow diagnostic system and demagnetisation for both magnetising circuits
  • touch-panel for safe and easy operation
  • automatic sequencing circuit
  • constant current control
  • separate stainless steel tank with test liquid pump and dirt collecting sieve
  • solenoid valve for spraying system
  • possibility of combined testing according to EN ISO 9934-1

Part numbers:

  • 022690 (standard model)
  • 022691 (with extension)

For more information, see the Product Data Sheet.

Ferroflux with IsotestOur Ferroflux benches detect longitudinal and transversal cracks in two separate sequential steps. The standard systems are suitable for testing work pieces with clamping lengths from 400 mm up to a maximum of 3615 mm; we can also supply special clamping lengths if you need them.

All Ferroflux benches are supplied with external power packs to feed the magnetisation circuits and, if required, can be equipped with darkening cabins, an exhaust fan and a light fixture.

For more information, see the Product Data Sheet.