Test Pieces

Our test pieces contain precisely-defined artificial flaws that simulate real defects so you can check that your MPI equipment and processes are working properly.

Current Flow Test PiecesCurrent Flow Test Piece 026T001

Part numbers:

  • 026T001: 0-1000A, RRP58004, TP1
  • 026T003: 1000-3000A, RRP58004, TP2
  • 026T004: 3000-5000A, RRP58004, TP3

For more information, see the Product Data Sheet.

Magnetic Flow/Coil Test PieceTest piece 026T002

Part number 026T002: RRP58004, TP4 – 5 holes, 200 x 25 x 25 mm

For more information, see the Product Data Sheet.

Magnetic Particle Test BarTest bar 189838

Contains coarse and fine surface and subsurface defects in both directions. Meets or exceeds most industrial and military standards for artificial test specimens; complies with MIL-STD-271.

Part number: 189838

AS 5282 Test RingAS 5282 test ring

A magnetic particle test piece with pre-drilled holes to simulate subsurface defects.

The AS 5282 test ring complies with the following industry specifications:

  • ASTM E709-08 (Sections 14.2.2, 20.6.7 & 20.8.4)
  • ASTM E1444/E1444M-12 (Section 7.1.2, Annex A4)
  • ASME Boiler & Pressure Vessel Code (Section V, Article 7: T-766.1)
  • SAE AS5282

Part number: 026T005

For more information, see the Product Data Sheet.

Reference Block 1 according to EN ISO 9934-2 (MTU Test Block No. 3)MTU test block

After rinsing with test liquid, the MTU test block displays the extent to which the test liquid is able to deliver indications. Tested in accordance with EN ISO 9934-2; supplied with certificate and reference picture.

Part number: 026T042 / 135012

For more information, see the Product Data Sheet.

Reference Block Type 2

Use the reference block type 2 to evaluate the sensitivity of your magnetic ink. Tested in accordance with EN ISO 9934-2; supplied with certificate and reference picture.

Part number: 135013