•  

Magnetic Particle Test Pieces

Maintain your process by verifying mag particle performance

These test pieces for magnetic particle inspection will help you maintain your mag particle process by verifying magnetic particle performance. Use to check for mag particle deterioration, to compare different magnetic powders, to verify sensitivity or visibility or to assure field direction and strength.

Magnaflux Product Description Part Number
Current Flow Test Pieces Our current flow test pieces contain artificial defects that simulate discontinuities when verifying MPI system performance. 026T001 - 0-1000A, RRP58004, TP1
026T003 - 1000-3000A, RRP58004, TP2
026T004 - 3000-5000A, RRP58004, TP3
Magnetic Flow/Coil Test Piece Our magnetic flow/coil test piece contains artificial defects that simulate discontinuities when verifying MPI system performance. 026T002 - RRP58004, TP4 - 5 holes, 200 x 25 x 25 mm
Magnetic Particle Test Bar Contains coarse and fine surface and subsurface defects in both directions. Meets or exceeds most industrial and military standards for artificial test specimens and complies with MIL-STD-271. 189838
AS 5282 Test Ring A magnetic particle test piece with pre-drilled holes to simulate subsurface defects. Complies with the following industry specifications:
  • ASTM E709-08 (Sections 14.2.2, 20.6.7 & 20.8.4)
  • ASTM E1444/E1444M-12 (Section 7.1.2, Annex A4)
  • ASME Boiler & Pressure Vessel Code (Section V, Article 7: T-766.1)
  • SAE AS5282
026T005
Reference Block Type 1 according to EN ISO 9934-2 (MTU Test Block No. 3) After rinsing with test liquid, the MTU test block displays the extent to which the test liquid is able to deliver indications. Tested in accordance with EN ISO 9934-2; supplied with certificate and reference picture. 135012
Reference Block Type 2 Use the reference block type 2 to evaluate the sensitivity of your magnetic ink. Tested in accordance with EN ISO 9934-2. Supplied with certificate and reference picture. 135013
Quantitative Quality Indicators (QQI) QQI test pieces are used to verify field direction and relative strength. They also balance multi-directional fields and increase productivity by minimising magnetising shots. QQI test pieces are manufactured strictly in accordance with AISI 1005 - the applicable AMS standard for mild low-carbon steel, which is governed by SAE Aerospace Standard AS 5371. They also conform to ASTM E1444-05 and ASME Boiler & Pressure Vessel Code, Section V, Article 7-764.1.2. 519630 - KSC-230 Standard QQI
519631 - KSC-4-230 Miniature QQI
519632 - KSCT-234 Variable Depth QQI
Magnetic Indicator Strips These strips help to determine the direction of magnetic fields at the precise point of their location. They comply with EN-ISO 9934-1:2001. 008M004 - Type I for general use (G)
008M005 - Type II for aerospace work (A)

Product Properties

NDT TypeFluorescent Magnetic Particle Testing, Visible Magnetic Particle Testing

Applications

Ideal ApplicationAssure field direction and strength, Check for mag particle deterioration, Compare different magnetic powders, Verify sensitivity or visibility

Related Products

Subscribe to Magnaflux News:

Magnaflux

Faraday Road, South Dorcan Industrial Estate
Swindon, Wiltshire, SN3 5HE, UK
Telephone: +44 (0)1793 524566
Fax: +44 (0)1793 490459
Contact Magnaflux Customer Service

Select Your Country North America Mexico Brazil China Europe Russia India New Zealand, Australia, Japan, Southeast Asia
© 2019 Magnaflux - all rights reserved.
top

We have placed cookies on your computer to give you the best possible experience with our website. These cookies are also used to ensure we show you advertising that is relevant to you. If you continue without changing your settings, you are agreeing to our use of cookies to improve your user experience. You can click the cookie settings link on our website to change your cookie settings at any time.